How to work a hoover steamvac 1. **Preparation:** Before you start, remove any large debris from the floor or carpet. This will prevent the vacuum from getting clogged. Also, make sure to fill the SteamVac's water tank with hot water and the cleaning solution tank with the appropriate detergent. 2. **Assembly:** Attach the appropriate cleaning tool to the hose. For most jobs, you'll use the standard upright vacuum tool. However, for stairs or upholstery, you might use a different tool. Connect the hose to the SteamVac and make sure it's secure. 3. **Vacuuming:** Turn on the SteamVac and start vacuuming as you would with a regular vacuum cleaner. The SteamVac will suck up dirt and debris while also heating the water in the tank. 4. **Steaming:** Once the water has heated up, you can start steaming. This is especially useful for carpets, as the steam helps loosen dirt and stains. To steam, press the steam trigger on the handle. You'll see a jet of steam come out of the cleaning tool. 5. **Shampooing:** If you're shampooing, you'll need to wait until the water has heated up to the right temperature. Then, press the shampoo trigger on the handle to release the detergent. Work the cleaning tool back and forth over the area until it's clean. Here are some additional tips for using a Hoover SteamVac: - Always use the correct cleaning solution. Using the wrong solution can damage the SteamVac and void the warranty. - Don't use too much water. Over-wetting can lead to mold and mildew growth. - Be careful when steaming near delicate surfaces, such as wood or vinyl. The heat can damage these surfaces if you're not careful. - If the SteamVac starts to smell bad, it might be time to clean the tanks and hoses. Buildup of dirt and detergent can cause unpleasant odors. - If the SteamVac isn't picking up dirt, check the brush roll for hair and debris. These can block the roll and prevent it from spinning properly. By following these steps and tips, you can keep your carpets and floors clean and fresh with a Hoover SteamVac. A Hoover SteamVac is a versatile cleaning machine that not only vacuums but also steams and shampoos carpets and floors. Here's a step-by-step guide on how to work a Hoover SteamVac: 3. **Vacuuming:** Turn on the SteamVac and start vacuuming as you would with a regular vacuum cleaner. The SteamVac will suck up dirt and debris while also heating the water in the tank. 4. **Steaming:** Once the water has heated up, you can start steaming. This is especially useful for carpets, as the steam helps loosen dirt and stains. To steam, press the steam trigger on the handle. You'll see a jet of steam come out of the cleaning tool. 5. **Shampooing:** If you're shampooing, you'll need to wait until the water has heated up to the right temperature. Then, press the shampoo trigger on the handle to release the detergent. Work the cleaning tool back and forth over the area until it's clean.